SV-465P Automatic Edge Banding Machine with Pneumatic Fine Trimming and Corner Rounding
Pneumatic type automatic Edge Banding Machine SV-465P is with pneumatic fine trimming and pneumatic scraping, and corner rounding to give you a good corner profile.
The SV-465P is designed for processing MDF, particle board, plywood and other wood-based panels with PVC, ABS, melamine and wood veneer edge banding materials.
Its main advantage is the pneumatic fine trimming system with preset thickness settings. Instead of manually adjusting the trimming cutter every time the edge tape thickness changes, the operator can select the preseting from the touch screen. This simplifies operation and helps reduce setup time during daily furniture production.
The machine also supports narrow panels down to 40 mm in width, making it suitable for cabinet components, narrow furniture panels and other small-width workpieces.
Technical Specifications
| Specification | SV-465P |
|---|---|
| Model | SV-465P |
| Minimum Workpiece Length | ≥200 mm |
| Minimum Workpiece Width | ≥40 mm |
| Workpiece Thickness | 10–60 mm |
| Edge Banding Tape Thickness | 0.4–3 mm |
| Working Air Pressure | 0.7 MPa |
| Total Power | 14 kW |
| Machine Dimensions | 6000 × 1000 × 1600 mm |
| Fine Trimming | Pneumatic |
| Scraping | Pneumatic |
| Corner Rounding | 2 Heads |
| Corner Rounding Motor | 0.37 kW × 2 |
| Narrow Panel Feeding | Standard |
| PUR Gluing | Optional |
Function
The working line runs in a fixed order:
Gluing → End Cutting → Pneumatic Fine Trimming → Corner Rounding → Pneumatic Scraping → Flat Scraping → Cleaning → Pneumatic Buffing
1. Gluing
The glue pot applies EVA hot melt to the panel edge through a heated roller. Glue temperature and roller pressure are set for the tape thickness in use, because a 0.4 mm tape needs less adhesive than a 2 mm tape to avoid squeeze-out on the panel face.
2. End Cutting
Two end-cutting saws trim the leading and trailing overhang flush with the panel ends. The unit follows the panel as it moves, so the cut stays square at 16 to 20 m/min without the panel slowing down.
3. Pneumatic Fine Trimming
Two pneumatic units remove the remaining tape overhang from the top and bottom edge. This is where the preset system pays off: the four thickness settings are stored positions, so going from 0.4 mm to 2 mm tape is a selection on the touch screen rather than re-setting both cutters by hand wheel.
4. Corner Rounding
Two tracking motors with 0.37 kW each follow the rounded corner and cut the tape flush in one pass, removing the need to trim corners by hand afterwards. This is the station that decides whether a rounded cabinet door looks finished or has a hand-worked corner.
5. Pneumatic Scraping
Two scraping units remove the fine trimming marks left on the top and bottom edge. Scraper pressure is set per thickness preset, which matters most on thin 0.4 mm tape where a scraper set for 2 mm would cut through.
6. Flat Scraping
The flexible flat scraping unit works on the panel face beside the tape line and clears the thin glue film that a roller leaves behind. Skipping this station shows up later as a dull streak under lacquer.
7. Cleaning
Rotating cleaning wheels with solvent feed remove the remaining glue dust before buffing. Without it the buffing wheel smears residue along the edge instead of polishing it.
8. Pneumatic Buffing
The buffing wheels polish the finished edge, and the pneumatic pressure control keeps the contact force constant as the wheel wears. That is the difference between a uniform sheen along a 2.4 m panel and a patchy one.
Share
Description
Pneumatic type automatic edge banding machine sv-465P is a multi-functional woodworking edge bander independently developed by Samdy Machinery, a professional woodworking machinery manufacturer based in Foshan, China.
Equipped with pneumatic fine trimming, automatic corner rounding and pre-set cutter system, it is for MDF, particleboard, plywood and melamine panels.
As an all-in-one panel edge processing device, it integrates gluing, end cutting, Pneumatic adjusting fine trimming,corner rounding scraping and buffing functions in one machine, widely used in cabinet, custom furniture and wood component mass production workshops.
The SV-465P is positioned as a practical automatic edge banding machine for furniture manufacturers that need pneumatic fine trimming, corner rounding and narrow-panel processing without the additional cost and footprint of a pre-milling configuration.
For customers who already use a CNC router or computer beam saw to prepare panel edges, the SV-465P can provide an efficient downstream edge banding and finishing process.
For customers who need pre-milling or more advanced multi-unit processing, SAMDY can recommend other automatic edge banding machine models according to the production requirements.
But it doesn’t have premilling function,if you use panel saw machine to cutting panels ,we recommend SV-468JP model with premilling to remove the shipping edge after cutting by panel saw machine.
Use Scenarios
Kitchen Cabinet Manufacturing
A cabinet shop runs the same panel through the line hundreds of times a day,which is where the 16–20 m/min feed rate matters. The narrow panel device earns its place here too: cabinet sides and shelves are often cut below 100 mm wide,and thin strips are the workpiece that most often derails on a machine without it.
Wardrobe and Custom Furniture
The narrow-panel feeding capability makes the machine suitable for wardrobe components, customized furniture panels and small-width workpieces.
Office Furniture
The machine can be used for edge processing of desks, cabinets, shelves and other office furniture panels.
Panel Furniture Factories
In a factory running mixed orders, the constraint is not speed but changeover.Four stored trimming presets mean a batch of 0.4 mm shelf banding and a batch of 2 mm door banding can run back to back on the same shift without a setup window between them.
Custom Furniture Workshops
The preset pneumatic trimming system helps operators change between commonly used edge tape thickness settings without repeated manual cutter adjustment.
Key Features
Pneumatic Fine Trimming with Preset Adjustment
The SV-465P uses a pneumatic fine trimming system for trimming excess edge banding material from the upper and lower edges of the panel.
Four preset thickness settings are available for quick adjustment. The standard settings are 0.5 mm, 0.8 mm, 1.3 mm and 1.5 mm, and other settings can be configured according to production requirements.
This design reduces the need for repeated manual cutter adjustment when changing edge tape thickness.
Automatic Corner Rounding
The SV-465P is equipped with a two-head corner rounding system driven by two 0.37 kW motors.
The corner rounding unit automatically processes panel corners after edge banding, helping produce a consistent rounded corner profile for cabinet doors, wardrobe panels and other furniture components.
Narrow Panel Processing
The machine is equipped with a narrow-panel auxiliary feeding device.
The minimum workpiece width is 40 mm, making the SV-465P suitable for narrow cabinet components and small-width furniture panels that can be difficult to feed on conventional edge banders.
FAQ
What materials can the SV-465P edge banding machine process?
The machine is designed for wood-based panels such as MDF, particle board and plywood, and can process common edge banding materials such as PVC, ABS, melamine and wood veneer.
What is the minimum panel width?
The minimum workpiece width is 40 mm when the narrow-panel auxiliary feeding device is used.
What panel thickness can the SV-465P process?
The machine supports workpiece thicknesses from 10 to 60 mm.
Does the machine require manual trimming adjustment?
The pneumatic fine trimming system uses preset thickness settings. The operator can select the appropriate preset from the touch screen instead of repeatedly making manual cutter adjustments.
Is PUR hot-melt glue available
yes, PUR gluing is available as an optional configuration. Please confirm the exact glue system before ordering.
Can SAMDY customize the machine?
Yes. SAMDY can discuss customized configurations according to the customer’s panel material, edge tape, production requirements and electrical specifications.
What is the warranty period?
The standard warranty stated by SAMDY is 1 year. Please confirm the detailed warranty terms and after-sales service conditions in the sales contract.
What is the lead time?
The current product information states a typical delivery time of 30–35 days. The actual lead time should be confirmed with SAMDY according to machine configuration and production schedule.
Touch Screen
Our touch screen is responsive and durable,low 4 setting are available,when you need to change different thick PVC tape,just click the thickness on touch screen,no need to adjust cutter.
One-click switch for different edge tapes.
PLC and Inverter
Good quality ensure machine working stable and provide good after sale service.
Famous Brand Contactor
The electrical control system uses Shilin PLC, inverter and touch screen components together with Schneider contactors.
These components are used for machine control and electrical switching functions.
Narrow Plate Auxiliary Device
This auxiliary device can make the narrow panels feeding very well.It solves the feeding difficulty of small cabinet panels.
Press Rollers With Scraper
The machine uses six pressing rollers to press the edge banding material against the panel edge.
The rubber pressing rollers help distribute pressure along the panel edge and support consistent edge tape adhesion during continuous processing.
Pneumatic Fine Trimming
It is used to trim excess edge banding material on the upper and lower edges of the processed board to ensure that the upper and lower parts of the trimmed board are smooth. Pre-seting 4 kind of thickness.
0.5-0.8-1.3-1.5mm,this setting can meet all your production requirements.We also can set according to your requirements.You get free adjusting edge banding machine.
Corner Rounding
2 independent 0.37KW corner rounding motors realize uniform arc trimming on panel corners, neat and consistent edge rounding effect.
Using 0.37*2 motor.
Edge Banding Effect
SV-465P edge banding machine supports 0.3–3mm various edge band materials, producing smooth, seamless, beautiful panel edges without burrs, greatly improving furniture finished grade.
Buffing
Pneumatic buffing can provide perfect buffing effect,it is equal 2 units of buffing.
Buffing is the last station on the line and the one that decides how the edge reads under light. It does not change the geometry of the edge — it removes the fine haze that scraping leaves on the tape surface
Flat Scraping
Flat scraping works on the panel face rather than the edge, and it is the station that most often gets skipped on cheaper machines. Skipping it does not show up immediately — it shows up after lacquering.
SAMDY FACTORY
Foshan CNC Samdy Co., Ltd. is a China-based manufacturer of woodworking machinery, specializing in CNC machining and automated equipment for the furniture and woodworking industries.
Founded in 2005 and located in Foshan, Guangdong, China, SAMDY has more than 20 years of experience in the development and manufacturing of woodworking machinery. With a factory covering more than 4,000 square meters, we provide reliable equipment and complete production solutions for furniture manufacturers, cabinet factories, woodworking companies, panel furniture producers, and machinery distributors worldwide.
Our product range includes CNC routers and nesting machines, automatic edge banding machines, CNC drilling machines, panel saws, pressing machines, aluminum honeycomb panel processing machines, and other specialized woodworking equipment. Our machines are designed to support key production processes including panel cutting, CNC machining, drilling, edge banding, and other furniture manufacturing applications.
Related products
-
Edge bander for wood panel furniture
45 Degree Bevel Automatic Edge Banding Machine SV-X368J
$9,000.00 Add to cart -
Edge bander for wood panel furniture
KDT Style Edge Banding Machine SV-368 With Double Trimming For Panel Furniture Production
$6,800.00 Add to cart -
Edge bander for wood panel furniture
Cost-Effective China Automatic Edge Banding Machine SV-365J with Pre-Milling
$8,700.00 Add to cart -
Edge bander for wood panel furniture
Basic Automatic Edge Bander SV-365 with 5 Functions for Furniture Panels
$6,200.00 Add to cart
We Also Provide OEM & ODM Service
As a professional woodworking machinery manufacturer, SAMDY cooperates with distributors, brand owners and project contractors worldwide — from brand color and logo to voltage, plug, language and packaging.
- Brand logo & machine color
- English / Spanish / Russian panel/or other language
- Exclusive agent protection
- Custom tooling & fixtures
- Voltage 220V/380V/440V/60Hz
- Container loading optimization
CONTACT US
If you have any queries, get in touch today! Don’t hesitate. We try to take the extra step for our customer satisfaction.


