Cold Press Machine Pressing Boards Steps:

1. After gluing (by brushing or spraying) on the boards, quickly assemble and align the stack, then stack it neatly on the work table.

2. Activate the equipment to apply pressure (set to 50–60 tons) and maintain it for the followings:

• White PVA glue: 4–8 hours;

• laminating glue adhesive: Maintain pressure for 2–5 hours;

• Pre-pressing stage: 30–60 minutes, then transfer directly to the hot press machine.

FAQ For Cold Press Machine:

Q1: How much pressure can this cold press provide?

A: Standard models are 50-ton, 60-ton, and 80-ton. Custom 100–200-ton heavy-duty versions are available.

Q2: How long does it take to press a batch of wooden doors?

A: Depends on glue type and wood door type,normally it will take 4–8 hours.

Q3: Will the machine frame deform after long working?

A: No. The machine frame undergoes high-temperature stress relief treatment. After 5 years of continuous heavy pressing, no bending or deformation occurs.

Q4: What is the flatness of the pressed board?

A: Our working table been precision-machined using CNC equipment.board flatness error is controlled within ±0.3mm/m, fully meeting high-end cabinet and wooden door factory requirements.

Q5: Is the hydraulic system easy to leak oil?

A: Equipped with high-density good sealing parts. The pressure holding success rate is 99.8%, almost zero oil leakage.

Q6: Can it press large-sized door panels and long boards?

A: Yes. We support customized table length from 2.5m to 4m, opening stroke up to 1300mm.

Q7: Can you provide customized voltage for different countries?

A: Yes. We support 220V/380V/415V/480V and 50Hz/60Hz to adapt to global factory electricity standards.